Work included concrete spalling, delamination and crack repair. Along with balcony edge repair and re-sloping of balcony surfaces. All existing sealants at window perimeters and cold joints were removed and replaced with new urethane sealants and caulking. Failed paint and coating systems were removed via concrete polishing. New paint acrylic and high performance paint systems were applied to the entire building envelope. Existing membranes at the deck surfaces were removed and new membranes were installed. The Building was accessed via rope access and swing stage scaffolding.

Work included the removal and disposal of failed wood siding, reframing of windows and building openings, installation of new Tvek building paper, flashings and a rain screen system. New hardie board and batten panels was installed throughout. At concrete surfaces concrete spalling, concrete delamination and crack repair were performed. Sealants at window perimeter were removed and replaced where needed.  Failed paint and coating systems were removed and new high performance paint systems were applied. The Building was accessed via ladder, boom lift and stage scaffolding.

Work included power washing of all surfaces with a mildew treatment prior to powerwashing. Preparation work included the restoration of structural steel via grinder and the removal of failed paint. Metal and galvalume channel siding was primed with Amerlock 400, a high-solids, high-build epoxy protective coating and then finished with two coats of PSX 805 siloxane coating, a specialty coating with exceptional adhesion and color retention.

Our work included the removal and replacement of rotten wood fascia and barge boards throughout this multi-building commercial shopping centre. Much of our work was performed after hours to minimise impact on tenants and customers. Scope of work also included power washing of all substrates and the painting of stucco, wood, concrete and metal utilizing various coating systems to ensure a long lasting and durable painting system

Our work on this warehouse renewal project included a full power wash and bleach treatment to prepare the surface for painting, followed by concrete spalling and delamination repairs. Failed expansion joints were removed and replaced using Dymonic FC polyurethane sealant. Failed paint was mechanically removed, bare surface were primed and we applied two coats of a high build acrylic paint from PPG Dulux. Metal surfaces were mechanically grinded at rust spots, primed with a rust inhibitive bonding primer and then top coated with a high performance urethane enamel coating system.

Scope of work for this warehouse and commercial building renewal included powerwashing and bleach treatment. Application of bonding primer at bare substrates and the application of two finish coats using a high build acrylic coating system. Our work included the re-painting of Costco’s signage throughout the building. To minimise disruption to the business, our work was completed through night shifts and high powered lights deployed to illuminate the building and allow for work after hours.

Our work on this commercial office building renewal and painting project included a full power wash and bleach treatment to prepare the surface for painting. Extensive concrete spalling and delamination repairs were completed. Failed paint was mechanically removed and we applied two coats of a high build  acrylic paint from PPG Dulux to protect the tilt up concrete walls. Metals window surfaces were mechanically sanded to achieve a profile and prepare for a full coat of bonding primer. We then applied two full  top coats of a high performance waterborne enamel via airless sprayer. Much of our work was performed after hours to minimise operational impact for the business and allow our team full access to the site.

Our work on this large multi story apartment complex renewal project included a full power wash and bleach treatment to prepare the wood for painting and staining, followed by the repair and replacement of missing and damaged shingles. Wood rot was identified at fascia and trim boards and those boards were replaced by our technicians accordingly. Shingle, siding and trims received two full finish coats of a high performance solid color stain. The building was accessed via boom lift and stage scaffolding.

Our work on this large strata townhouse complex project included a full power wash and bleach treatment to prepare the wood for painting. Followed by the repair and replacement of missing and damaged fascia and trim.  Wood and hardie siding and trims received two full finish coats of a high performance paint. The building was accessed via boom lift.

Our work on this large Surrey strata townhouse complex project included a full power washing to prepare the wood and other surfaces for painting. Followed by the repair and replacement of missing and damaged fascia, trim and deck railings and spindles Extensive pre work was completed throughout. Wood and trim including, fascia, barge boards, railings, doors and frames received two full finish coats of a high performance paint. The building was accessed via boom lift.

Scope of work on this warehouse renewal project included a full power wash and bleach treatment to prepare the surface for painting, followed by concrete spalling and delamination repairs. Failed expansion joints were removed and replaced using and failed paint was mechanically removed. We applied two coats of a high build acrylic paint. Metal surfaces were mechanically grinded at rust spots, primed with a rust inhibitive bonding primer and then top coated with a urethane enamel coating system.

Our work on this New Westminster townhouse complex project included a power washing to prepare the wood and other surfaces for painting. Followed by the repair and replacement damaged fascia, trim and door frames, along with hardie substrates. Extensive prep work was completed throughout the complex. All surfaces received two full finish coats of a high performance acrylic paint. The building was accessed via boom lift and ladder.